BUILT-IN DEVICES
IN VISIBLE ROOF STRUCTURES
INSTALLATION IN RAFTER INSULATION
UNI-FLEXX FRONT PARTS FOR XL 150
A visible roof construction is a visual highlight in any timber construction, but presents the electrician with great challenges. Until now lights, loudspeakers or other built-in devices could only be installed with complicated constructions. The Uni-Flexx now offers the optimal solution for this. In combination with the installation housing XL 150 safe installation under insulation is as easy as it could be. See for yourself.
AND ACTION!
The innovation for hollow ceilings
For the installation of lights, loudspeakers or other built-in devices in visible roof constructions, only a small 74 mm hole in the formwork is required. This can be done by any fitter without additional special tools.
- 74 mm bore hole
- 68 mm installation opening
- 10 – 50 mm installation depth (can be shortend in stages)
Thanks to the mounting brackets, the front part is fixed within seconds and the installation housing XL 150 is attached securely. You now benefit from all advantages that the XL-Series offers. Among other things, conduit entry without tools, absolute concrete-tightness, integrated conduit grip and optimal thermal management. Due to this new solution, the insulation is not damaged during the installation of built-in devices and fire safety is still guaranteed.
Further information can be taken from the data sheets:
SIMPLE INSTALLATION
IN A FEW STEPS
Drill a 74 mm hole in the formwork. A commercially available hole saw is suitable for this.
If necessary, cut off installation segments to adapt the installation depth to the ceiling thickness.
Insert the Uni-Flexx into the drill hole.
The Uni-Flexx front part is fastend to the formwork with screws. The mounting brackets serve as a guide for the screws.
Attach installation housing XL 150. The universal tunnel can optionally be attached to expand the installation space.
Open the membrane with a cutter knife to insert cables and conduits.
Attach the insulation.
Connect built-in lights and other built-in devices from below and insert them into the 68 mm installation opening. Done!
Complete installation.
Optimum air circulation is guaranteed by ideal thermal management in the installation housing.
Suitable for clips with rubber coating and metal clips with expanding tabs.
The installation housing and the Uni-Flexx do not damage the insulation. Thus, the energy efficiency is maintained.
COMPONENT PARTS FOR
THE UNI-FLEXX
Follow a manual added link
INSTALLATION HOUSING XL 150
The installation housing XL 150 was originally developed for concrete construction. Due to its design, the installation housing XL 150 – in combination with the Uni-Flexx – is ideal for the installation of built-in devices in visible roof constructions. The insulation remains intact and thus energy efficiency is still guaranteed. Thanks to the membrane entries, the XL 150 convinces with quick and easy installation and offers many other advantages. For this outstanding quality, functionality and innovation the XL-Series was rewarded with the prestigious Red Dot Award.
Follow a manual added link
UNIVERSAL TUNNEL
The universal tunnel creates additional installation space, which is suitable for larger electronic components. It can be attached to the Primo installation housings XL 150, XL 200 und XL 250.
FURTHER SOLUTIONS FOR
CAVITY WALL INSTALLATION
WE ARE
THERE FOR YOU
Hotline
+49 8638 88559-200
Ask our experts
To the Primo expert chat
E-Mail
info@primo-gmbh.com
