Everything you need to know
FAQs
Everything about
Primo Products
Where can I get advice on Primo products?
We're here for you! Our experts are happy to answer your questions and provide detailed advice by phone or in person at your construction site or factory. Contact us now!
The fastest flush-mounting system in the world
flush-mounting installation
How many boxes does one bottle of Thermo Foam cover?
A bottle Thermo Foam Enough for about 100 boxes. For bricks, about 70 boxes; for Ytong, sand-lime brick, and concrete, about 120 boxes.
How much foam is needed for one box?
The box only needs to be foamed 1/3 full, as the foam expands.
Why does the Thermo Box cost more than the standard flush-mounted box?
Our speakers are not standard speakers, they can do a lot more! Thermo Boxes are installed in seconds with Thermo Foam. Time-consuming plastering and mortaring as with conventional products is no longer necessary. The highlight: In combination with Thermo Foam, the Thermo Boxes enable airtight and thermal bridge-free installation including sound insulation.
In addition, the SCS connection technology allows several boxes to be lined up and firmly connected. The connecting bar can then be easily removed for quick wiring or the installation of pre-wired devices. Furthermore, thanks to the Cable-Plopp, cables can be inserted without any tools. All this makes the Primo Thermo Box system the Fastest flush-mounting system in the world and You save up to 70% assembly time for each individual Thermo Box.
Additionally, only one type of box is required for the entire flush-mounted construction site. This saves storage costs and can also counteract the shortage of skilled workers, as there's no risk of confusion during installation.
Can the Thermo Box be used in the external thermal insulation composite system (ETICS)?
Yes, the Thermo Box is suitable for use in external thermal insulation composite systems (ETICS). It can be used in the following masonry types: Poroton / brick, Ytong, sand-lime brick, solid wood, concrete, pumice stone, EPS (Styrofoam), XPS (Styrodur), PU insulation boards, wood fiber insulation, wood chip cladding.
Are there plaster leveling rings?
The integrated plaster stop ensures Thermo Box Flush-mounted installation according to DIN standards is already specified. If necessary, all conventional compensation rings fit the Thermo Boxes.
How can slots be milled after foaming without damaging the box?
Thanks to the Membrane Teeth, the Thermo Boxes The boxes are firmly secured in the drilled hole during insertion – without foam. This allows the boxes to be installed pre-wired/pre-piped. For multiple combinations, the SCS connection technology provides additional stability; the connecting bar can be quickly and easily removed if necessary.
So you can use the Fast runners Drill the hole first and then mill the slots directly before inserting and foaming the Thermo Box. This eliminates the risk of damaging the box. Furthermore, this method saves you up to 70 percent of your working time.
Why is installation with Thermo Foam better than with plaster?
Our Thermo Box system is VDE-certified and suitable for thermal bridge-free installation. Good to know: Gypsum is not permitted in exterior walls or damp rooms due to the risk of mold growth.
Our Thermo Foam is suitable for all applications. Thermo Foam meets DGNB quality levels 1 and 2. The Thermo Foam ECO meets DGNB quality levels 3 and 4. This enables sustainable construction methods according to KfW funding programs.
What advantages does the Primo Thermo electronics box offer over standard electronics boxes?
At Primo Thermo-electronic box No need for time-consuming plastering; it is easily installed in seconds using Thermo Foam. The box offers sufficient space for network cables, KNX systems, and other fieldbuses for building automation. Additionally, the second opening can be easily opened, creating a multiple combination at the standardized spacing of 71 mm. Furthermore, the Primo Thermo electronics box can also be used as a Soundproofing box should be used.
How do I achieve the required precise drilling for the Thermo Boxes?
We have just the right accessories for this: our Drilling TemplateThe drilling guide enables box milling with a standard hole spacing of 71 mm in alignment. It is attached using the quick-clamping function and aligned using integrated spirit levels. This allows for the creation of multiple combinations with just one measurement.
Does working with the drilling template take longer?
Your big advantage when working with the Drilling Template is that it only needs to be marked once. There is no need to adjust the box afterwards. Our Fast runners is the perfect accessory. It enables faster and cleaner drilling. This reduces damage to the wall. Even in (filled) exterior walls, it prevents large-scale breakage of the drill hole and the resulting significant damage. The boxes can be placed more precisely, and material consumption is reduced.
Does the drilling template have to be used to use the Thermo Box system?
No, but the Drilling Template is a practical tool that helps you save significant time while achieving high-quality results. The drilling template ensures precise and clean drill holes. However, you can also install the Thermo Boxes without the drilling template.
What do I do if my speed runner is broken?
Please fill out our Repair order high-speed driller .
Can the Thermo Box system be used in old buildings?
The Thermo Box system is ideal for installation in older buildings. Thanks to its Membrane Teeth, the Thermo Box It holds anywhere, even if a lot of material has already been removed. For flush installation on already plastered walls, simply break off the plaster stop and insert the box completely.
Which box can be used if it is unclear what material is behind the walls?
The Thermo Box is always the right choice because it holds in any material.
It can be used in the following masonry: Poroton / brick, Ytong, sand-lime brick, solid wood, concrete, pumice stone, EPS (Styrofoam), XPS (Styrodur), PU insulation boards, wood fiber insulation, wood chip cladding
Why is there a hole in the plaster cover?
The hole in the middle of the Plaster cover serves as a centering hole. This allows the plaster cover to be removed in a snap with a 68 mm core bit without causing the surrounding plaster to crumble.
Are the cleaning covers reusable?
Yes, the Plaster cover are reusable and thus ensure sustainable and resource-saving use of materials.
What do you need the Equipment Carrier for?
On the Thermo Box or the M1 is plugged in the Equipment Carrier to the luminaire outlet, including an 84 mm mounting surface. The equipment holder is then screwed in place without the need for dowels or drilling. The equipment carrier is also suitable for luminaires with narrow mounting bases. It also serves as a signal cover during plastering, thus protecting the interior of the box from dirt.
The new dimension
cavity wall installation
The drywaller rips off the cable holder – what to do?
DIN 18299 (General regulations for construction work) requires that damage and impairment of other trades must be avoided when carrying out work.
We recommend that you Cable Holder The handling should be discussed and finalized during the construction meeting. All trades (electricians, drywallers, client) then benefit, for example, no digging work, no filling work, and no ripped-out insulation.
How can I save costs on the construction site with the Cable Holder?
What is the most expensive thing on the construction site? Working time! Cable Holder This eliminates unnecessary drilling for electricians, as well as rework for drywallers and plasterers. A second measurement is also eliminated.
The drywaller tears off the cover of the Multi Box – what to do?
DIN 18299 (General regulations for construction work) requires that damage and impairment of other trades must be avoided when carrying out work.
We recommend that you Multidose The handling should be discussed and finalized during the construction meeting. All trades (electricians, drywallers, client) then benefit, for example, no digging work, no filling work, and no ripped-out insulation.
How can I save costs on the construction site with the Multi Box?
What is the most expensive thing on the construction site? Working time! Multi Box This eliminates unnecessary drilling for electricians, as well as rework for drywallers and plasterers. A second measurement is also eliminated.
Does working with the drilling template take longer?
The big advantage is that you only have to mark the box once. There is no need to adjust it later. Our Bohr-Fixx is the perfect accessory for this. Turning the screwdriver or drill clockwise cuts an opening in hollow walls, e.g., made of wood, plasterboard, or mineral fiber; turning the screwdriver or drill counterclockwise ejects the drill core fully automatically and effortlessly.
Which borehole is required for the Uni-Flexx?
For the Uni-Flexx A 74 mm hole must be drilled in the rafter insulation.
Is the Uni-Flexx vapor-tight?
Will the Uni-Flexx and Installation Housing XL 150 Installed beneath the film, ideal thermal management is ensured. If drilling through the film is subsequently carried out, it must be professionally sealed.
Does only the Primo core bit fit on the Bohr-Fixx?
On the Bohr-Fixx Fits any standard 4-hole crown from 38 mm to 127 mm.
How should I drill for the Q series? Will a 68mm drill bit fit?
No, for the cavity wall boxes of the Primo Q Series A hole must be drilled with a 74mm drill bit.
Can the 74mm drilling template be drilled with a center drill?
Yes, because the top edge has been specially extended so that the Center drill does not need to be removed during drilling.
When mounting the UniQ from the rear, is the hole drilled from the front or from behind?
It is recommended to UniQ Drill the hole from the front. This allows you to mark and drill the boxes precisely according to the installation plan. It also creates a cleaner hole from the front, as drilling from the back risks fraying the drywall, for example.
What is the advantage of the installation diameter of 74 mm?
With a Diameter of 74 mm The installation space is significantly larger than with conventional installation boxes. In multiple combinations, the boxes of the Q Series This allows the components to be firmly connected to each other at a standardized combination distance of 71 mm before installation. The SCS connection technology with large-area connecting membrane The included cable-popping technology allows for easy wiring without connectors. This saves you a noticeable amount of time!
Why does the Qnect/UniQ cost more than a standard cavity wall box?
The Q-Series Cavity Wall Boxes are all halogen free and lairtight and offer you numerous advantages and application possibilities in one box. With a Diameter of 74 mm The installation space is significantly larger than with conventional installation boxes. In multiple combinations, the boxes can be firmly connected to each other before installation at the standardized combination distance of 71 mm. The SCS connection technology with large-area connecting membrane The included cable-popping technology allows for easy wiring without connectors. This saves you a noticeable amount of time!
With its fastening claw, the Qnect to panels with a thickness of 0 to 37 mm, which is not possible with standard cavity wall boxes. In addition, there are a total of 8 screw domes on the box, which allows for flexible alignment. When installing the UniQ There is no need for any screwing, which saves a huge amount of time.
Can the rear cavity wall box UniQ be used as an electronics box?
Yes, because the UniQ Larger than a conventional cavity wall box, it offers significantly more installation space. For multiple combinations, the boxes can be firmly connected to each other at the standardized combination spacing of 71 mm before installation. The SCS connecting bar can then simply be removed. This also allows for time-saving installation of pre-wired devices.
For which wall types are the Q-Series Cavity Wall Boxes suitable?
The Qnect is suitable for walls with a thickness of approximately 2 mm or more: OSB board, wood board, plasterboard, metal
The UniQ is suitable for double-planked walls made of: OSB board, wood board, plasterboard
Do the Q-Series Cavity Wall Boxes provide sound insulation?
Not fundamentally, but we have the Qnect soundproofing box This system provides a protection level of 60 dB thanks to sound-absorbing material and sound-optimized membranes.
Do the Q-Series Cavity Wall Boxes offer line containment?
Yes, the Cavity Wall Boxes of the Q Series provide secure cable fixation through cable retention up to 2 kg / 20 N.
The new generation
concrete installation
The M1 is too big – are there other sizes?
No problem, we have the M2 or M3.
Why does the M1 cost more than a standard concrete box?
Yes, the M1 is priced slightly higher than competing products. However, what is the most expensive thing on the construction site? Labor! Thanks to modern membrane technology, the boxes absolut concrete-tight and Cables and conduits can be inserted without tools. The integrated conduit grip ensures secure strain relief – annoying rework and subsequent conduit cutting are completely eliminated, which saves a noticeable amount of working time.
With the M1, you have the huge advantage of only needing one box for the entire concrete installation. The M1 can be used as a device connection box, wing concrete box, ceiling connection box, large-diameter conduit box, or electronics box. This not only reduces your storage costs, but also eliminates the risk of the installer choosing the wrong product.
Does the conduit stay in the box?
Yes, thanks to the conduit grip membrane boxes everything is safely strain-relieved and absolutely concrete-tight.
Can the Thermo Box be used in the external thermal insulation composite system (ETICS)?
Yes, the Thermo Box is suitable for use in external thermal insulation composite systems (ETICS). It can be used in the following masonry types: Poroton / brick, Ytong, sand-lime brick, solid wood, concrete, pumice stone, EPS (Styrofoam), XPS (Styrodur), PU insulation boards, wood fiber insulation, wood chip cladding.
Do the wings hold on the M series?
: Yes, the wings hold on all Primo concrete products: membrane boxes, installation housings, universal junction boxes, grommets, elbows as well as wall and ceiling transitions.
Is the M series suitable for exposed concrete?
Yes, the membrane sealing lip prevents the ingress of concrete film between the formwork and the M1 / M2 / M3 prevented.
Why is there no thread for ceiling hooks?
We did this deliberately because construction sites are always dirty. If there's dirt in the thread when you screw in the ceiling hook, you might end up stripping the thread.
Can membrane technology withstand the pressure of concrete?
Yes, it has been tested. We also have many satisfied customers who have concrete doses obstruct.
Can the M1 be used as a CEE box?
For this we have the special M1 CEE in our product range. This is a further development of our M1, which has already been installed millions of times, and is designed to meet the specific requirements of high-voltage installations.
Which CEE sockets fit into the M1 CEE?
Any conventional manufacturer of a CEE socket fits into the M1 CEE. It is therefore suitable for use with 16 A CEE device inserts.
What protection class is achieved with the M1 CEE?
The M1 CEE Sealing ring of protection class IP 44 prevents the penetration of moisture into the box, thereby fulfilling the required DIN 60309 for CEE plugs.
Why do the XL Series recessed housings cost more than standard luminaire recessed housings?
The XL series is priced slightly higher than competing products. However, what's the most expensive thing on the construction site? Labor! Thanks to modern membrane technology, the installation housings absolutely concrete-tight and cables and conduite can be inserted without tools. The integrated conduit grip ensures secure strain relief – annoying rework and subsequent conduit cutting are completely eliminated, which saves a noticeable amount of working time.
The XL series installation housings are perfect for mounting all built-in components, such as lights, speakers or other built-in devices.
Why is the cover removable?
The removable cover allows cables and conduite to be inserted into the Installation Housing Thanks to the integrated membrane sealing lip, everything remains absolutely concrete-tight.
Is it possible to expand the installation housings with a transformer tunnel?
Yes, there is an optional mounting bracket for the XL 150, XL 200 and XL 250 installation housing. Transformer tunnel. The transformer tunnel creates additional connection space, ideal for larger electronic components, for example. It can be universally attached to all XL series enclosures.
Are built-in devices in the built-in housing protected against overheating?
The smart design of the Installation Housing enables optimal thermal management – even when using the transformer tunnel.
Why does the Universal Junction Box cost more than a standard concrete box?
The Universal Junction Box is very flexible in its use. Thanks to modern membrane technology, the box absolutely concrete-tight and Cables and conduits can be inserted without tools. The integrated conduit grip ensures secure strain relief – annoying rework and subsequent conduit cutting are completely eliminated, which saves a noticeable amount of working time.
The three-part design with cover, box, and front part allows, among other things, the front part to be positioned before the reinforcement is inserted, which clearly distinguishes the Primo Universal Junction Box from conventional two-part competitor products. The M40 inlet is also unique on the market. The different front parts in 60 mm and 70 mm as well as a optional divider For two separate circuits in one box. Another advantage of the three-part Universal Junction Box is that you nail the base plate on first, then, after the first layer of iron, you can attach the box to it and screw on the cover – thus, the cover cannot get lost.
Is the Universal Junction Box available in different sizes?
The Universal Junction Box is available in two versions. You can choose between a Front part with 60 mm diameter and a Front part with 70 mm diameter choose.
Can two separate circuits be installed in one box?
Yes, the optional DividerThis is easily inserted into the Universal Junction Box, allowing for a clean and safe separation of the two circuits.
In what sizes are the C-Series wall and ceiling transitions / grommets and elbows available?
The C-Series grommets are available in sizes M20, M25, M32 and M40 The C-Series manifolds are available in sizes M20, M25 and M32 .
How many Newtons can the claw sleeves hold?
The Claw sleeves hold up to 380 N.
Which conduites hold the claw sleeves?
Thanks to conduit grip technology, the transitions and connectors ensure absolutely secure strain relief – regardless of the conduit manufacturer used. Additional fixation with adhesive tape or other means, as was previously the case, is no longer necessary.
What is the support on the manifold for?
This is the support anchor. It supports the manifold and gives it additional stability so it doesn't break.
Can the C-Series grommets and elbows / wall and ceiling transitions be combined with each other?
Yes, thanks to the well thought-out plug-in system of the C-Series All sizes can be combined safely and stably.
Can a conduit be continued into a drywall after concreting?
Yes, because our starting product is a claw sleeve is, continuing is no problem.
How can the Schalfix be disposed of after removal?
The Schalfix does not have to be disposed of as hazardous waste, but can be conveniently disposed of with household plastic waste.
How is the ventilation outlet mounted to the ventilation sleeve?
Simply attach the adapter ring to the Ventilation Sleeve screw on and the ventilation outlet can be installed.
Which borehole is required for the Uni-Flexx?
A hole of 74 mm is sufficient to create the installation opening for the Uni-Flexx This can be done by any mechanic. The Primo is suitable for this purpose. Fast runners with our Concrete core bit.
Alternatively, you can drill the hole using a standard 75 mm or 82 mm diameter core bit. The resulting gap between the Uni-Flexx and the hole can either be covered by the device used (ceiling spotlight, speaker, etc.) or can be filled during the planned filling process.
What is the Quickstar formwork protector used for?
The Quickstar formwork protector is a clever tool in concrete construction, enabling safe and stable transitions in no time. It's particularly suitable for tight spaces and, thanks to the stabilizing flap, retains its shape even after concreting.
How does the nailer work?
Our nailing aid for concrete construction products makes it easier to nail the boxes. The 40 cm long Nailer Nails covers and boxes to the formwork without damaging your fingers – even after the second reinforcement has already been installed. The pin spacing is 60 mm, allowing any standard box cover to be picked up, precisely positioned, and nailed into place.
Standardize, automate, increase quality
Factory Production
Is the M1 suitable for all wall thicknesses?
For different wall thicknesses we have the M1 (installation depth: 85 mm), the M2 (Installation depth: 68 mm) and the M3 (Installation depth: 48 mm) in the range. A suitable Push-on Frame extends the box by 2,5 cm each for even more installation space.
For narrow lamp bases, there is also a cover with 35 mm for each box of the M series Light outlet.
What installations can be performed with the M1?
M1 You have the huge advantage of only needing one box for the entire concrete installation. The M1 can be used as a device connection box, wing concrete box, ceiling connection box, large-diameter conduit box, or electronics box. This not only reduces your storage costs, but also eliminates the risk of the installer choosing the wrong product.
Can opposing speakers be created with the M-Series during wall production?
Yes, both the M1, the M2 as well as the M3 can be combined and plugged together at the back to install opposite boxes in the wall.
Are multiple combinations possible with the M series?
Yes, thanks to the SCS connection technology, the boxes of the M series can be easily and stably lined up at a standardized distance of 71 mm.
Can the installation space of the M1 be expanded indefinitely?
For more installation space in the box or for exact positioning of the conduit entry, the Push-on Frame straight to the M1To ensure a consistently stable connection for multiple sockets, the frame was also constructed using SCS connection technology.
How do you prevent the conduit from slipping out of the box during concreting?
Thanks to the conduit grips of the membrane boxes everything is safely strain-relieved and absolutely concrete-tight.
Does the conduit grip also work on coated concrete pipes?
Yes, it works perfectly. As a perfect combination with the Primo concrete construction program, we recommend our Concrete pipe.
Is an accessory such as a conduit coupling required when introducing (multiple) conduits?
No, simply insert the conduite without tools through the membrane of the M1 / M2 / M3 The membrane technology makes the boxes absolutely concrete-tight. The integrated conduit grip ensures secure strain relief. Subsequent cutting of the conduit is not necessary.
Can membrane technology withstand the pressure of concrete?
Yes, it has been tested. We also have many satisfied customers who have concrete doses obstruct.
How are the M-Series boxes attached to the formwork?
The boxes of the M series can be set using magnets (manually or with a robot), glued in the classic way or attached to the reinforcement with the wings.
How can the M-Series boxes be attached to the formwork-free side during solid wall construction?
There are two options: You use the Push-on Wings the M-series or the Extension element.
Do the wings hold on the M series?
Yes, the wings fit all Primo concrete products: membrane boxes, installation housings, universal junction boxes, grommets, manifolds and Wall and ceiling transitions.
What are the advantages of the XL installation housing?
Take the product out of the box, place it on the formwork and you're done! XL installation housing are absolutely concrete-tight, assembled in seconds and offer numerous possible applicationsThey are ideal for the installation of all built-in components – from lights and loudspeakers to other built-in devices. The particular advantage for the precast plant: Both the XL 200 as well as the XL 250 are with Magnet This saves time and delivers a higher-quality result. The perfect material for your perfect prefabricated part and a satisfied customer.
What versions of the XL installation housing are available?
With the XL installation housings, lights, speakers, and other built-in devices can be installed quickly and easily. We have the installation housings XL 150, XL 200, XL 250 as well as the XL 300 Releases.
Is it possible to vary the installation height of the XL installation housings?
For the installation housing XL 150 and XL 200 there is the XL 150 extension ring and the XL 200 extension ring. The extension ring can be attached to the recessed housing, providing additional installation space by raising it. As many extension rings can be connected together until the desired installation depth is reached. The plug-in system ensures a quick and stable connection.
Is it possible to expand the XL series installation housings with a transformer tunnel?
Yes, there is an optional mounting bracket for the XL 150, XL 200 and XL 250 installation housing. TunnelThe transformer tunnel creates additional connection space, ideal for larger electronic components, for example. It can be universally attached to all XL series enclosures.
The XL 300 installation housing is available in two versions: one with a transformer tunnel and one without a transformer tunnel.
Can the XL series be used in the production of exposed concrete?
Yes, the XL series is ideal for exposed concrete. Depending on the application, you can choose the right front part choose individually.
Why is the cover removable?
The removable cover allows cables and conduite to be inserted into the Installation Housing Thanks to the integrated membrane sealing lip, everything remains absolutely concrete-tight.
How are the XL series installation housings attached to the formwork?
The installation housings of the XL series can be placed using magnets (manually or with a robot) or glued in the traditional way.
What advantages does the Universal Junction Box offer over a standard concrete box?
The Universal Junction Box is very flexible in its use. Thanks to modern membrane technology, the box absolutely concrete-tight and Cables and conduits can be inserted without tools. The integrated conduit grip ensures secure strain relief.
The Universal Junction Box is available in two versions: With a 60 mm diameter front part or a 70 mm diameter front part.
A optional divider Allows two separate circuits in one box. It is easily inserted into the Universal Junction Box, allowing for a clean and safe separation of the two circuits.
How is the Universal Junction Box attached to the formwork?
The Universal Junction Box can be set using magnets, glued in the classic way or attached to the reinforcement with the wings.
In what sizes are the C-Series wall and ceiling transitions / grommets and elbows available?
The C-Series grommets are available in sizes M20, M25, M32 and M40 The C-Series manifolds are available in sizes M20, M25 and M32 .
Can the C-Series grommets and elbows / wall and ceiling transitions be combined with each other?
Yes, thanks to the well thought-out plug-in system of the C-Series All sizes can be combined safely and stably.
How many Newtons can the claw sleeves hold?
The claw sleeves hold up to NEVER.
Does the conduit grip also work with a covered conduit?
The Transitions and connectors Thanks to conduit grip technology, they ensure absolutely secure strain relief – regardless of the conduit manufacturer used. Additional fixation with adhesive tape or other means, as was previously the case, is no longer necessary.
Can a conduit be continued into a wall after concreting?
Yes, because our starting product is a claw sleeve is, continuing is no problem.
How is the C-Series attached to the formwork?
The C-Series can be glued in the classic way or attached to the reinforcement with the wings.
What are the advantages of Primo's standardized components?
With the Schalfix and the Ventilation Sleeve Do you have a enormous time savings When creating recesses. Custom and time-consuming wood or Styrofoam recesses are a thing of the past. The Ventilation Sleeve is ideal for ventilation recesses; Schalfix is recommended for all other applications.
Remove the product from the box, place it on the formwork and you're done!
Are there different sizes of the ventilation sleeve?
No, because almost exclusively residential ventilation DN 125 is installed. The Primo is suitable for this. Ventilation Sleeve Perfect.
How are the standardized components attached to the formwork?
The Schalfix is glued classically, the Ventilation Sleeve can be glued or placed using magnets.
What is the SchwaBi Anti-slip protection?
The SchwaBi Slip Guard is an innovative solution for the precast plant that prevents the concrete shells from slipping or twisting relative to each other.
The SchwaBi Anti-slip device consists of three parts: SchwaBi sword, SchwaBi Magnet and SchwaBi Cap.
